Ultra Tilefix Pro Level Fibre Levelling Compound Plus 20kg (Light Blue Bag)

Ultra Tilefix ProLevel Fibre Plus Floor Leveller - 20kg

Ultra Tilefix ProLevel Fibre Plus is a single-part, high strength, rapid drying and curing floor leveller made from graded fillers, cements, polymers and fibres. It is mixed with clean cold water to a free-flowing consistency and applied from 3mm to 75mm in a single application, internally or externally.

The fibre technology aids application and strength, giving light foot traffic after 3 hours and allowing tiling to commence after 4 hours at 20C. Substrates include concrete, sand/cement screeds, existing cementitious smoothing underlayments, terrazzo, primed anhydrite screeds, flooring-grade plywood, tile backer board and warm water or electric underfloor heating. Used for levelling subfloors before tiling and floors over underfloor heating where a strong, rapid curing base is required.

Specifications

Type: Single-part fibre reinforced floor leveller
Weight: 20kg
Application: Internal and external floors
Layer Thickness: 3mm to 75mm in one application
Mixing Water: 4.5L clean cold water per 20kg
Working Time: 20 to 30 minutes at 20C
Foot Traffic: 3 hours at 20C (3mm)
Tile-On Time: 4 hours at 20C
Coverage: Approx. 4.0m2 per 20kg at 3mm
Compressive Strength: 35 N/mm2 at 28 days
Shelf Life: 8 months unopened
Storage Conditions: Dry, off the ground, +5C to +25C, frost free

Key Features

• Single-part mix with clean cold water
• Fibre reinforced for strength and easier application
• 3mm to 75mm in a single application
• Light foot traffic after 3 hours
• Tiling can commence after 4 hours
• For internal and external use
• Compatible with warm water and electric underfloor heating
• Lays over plywood and tile backer board when prepared